USB CI-V Icom Interface
Connecting your Icom radios to your computer has never been easier!
Just $59 plus shipping!
Now connecting your Icom radios to your computer has never been easier!
WE ONLY SHIP TO THE USA. NOT CANADA, NOT ANYWHERE ELSE IN THE WORLD.
DO NOT ORDER IF YOU LIVE OUTSIDE OF THE USA.
The USB CI-V Interface plugs into the USB port of a Windows, Macintosh or Linux computer, allowing
an Icom radio (or other radios with a CI-V interface) to be connected and controlled via the CI-V (CIV)
protocol. An attached 6 ft USB cable plugs into a standard USB port on your computer.
One standard 1/8" cable to connect to your radio's CI-V port is included.
The interface acts like a standard serial port, so it works with all radio control programs. Note that it does not control the PTT line or pass audio.
The USB Icom CI-V Interface is powered off the USB bus, no external power is required.
It is effectively equivalent to the combination of an Icom CT-17 along with a USB to
serial interface, without the tangle of wires and extra power supply.
It will work with any radio that has a standard Icom CI-V interface jack.
Such radios include:
IC-1275, IC-275, IC-375, IC-475, IC-575, IC-7000, IC-703, IC-706,
IC-707, IC-718, IC-725,IC-726, IC-728, IC-729, IC-735, IC-736, IC-737,
IC-738, IC-7400, IC-746, IC-756, IC-761, IC-765, IC-775, IC-78,
IC-7800, IC-781, IC-820, IC-821, IC-910, IC-970, IC-R10, IC-R20,
IC-R7000, IC-R7100, IC-R72, IC-R75, IC-R8500, IC-9000L
If your radio is not listed, but it has a CI-V interface, it will work with that radio.
Please check the manual for your radio to make sure that it has a CI-V port, and whether or not
you need any special wiring. The USB CI-V Interface comes with cables designed to work with a
STANDARD CI-V port.
Note that some radios, such as the Icom R-20, have a special CI-V jack that also has audio.
You'll need to make a special cable for such radios, to only pass the ground and CI-V signal,
and not the audio.
Included drivers (for Windows 8 / 7 / Vista / XP and Macintosh MacOS 8.6-9.2 and Mac OS X 10.2 or later)
create an emulated serial port (COM1-COM8 for Windows, Communications Toolbox compatible for
Macintosh) that allow any well behaved application to use the USB Icom CI-V Interface as though
it was a normal serial port. This means it works with virtually any software program.
Linux users may wish to look at these notes for use under linux.
No other software is included with the unit, but most if not all existing Icom control programs
should work with the USB Icom Interface CI-V, as it appears as a normal serial port.
See the bottom of this page for links to some programs.
The USB CI-V Interface is only $59.00 plus $10.00 shipping within the USA. Due to the extremely high cost of overseas shipping, we only ship within the USA.
A two port version is available for $69.00, and a four port version is also available for $89.00.
If you connect two or more radios, they all appear on the same COM/serial port, you need to use software
that is capable of talking to multiple radios. You can only run one program at a time to control
the radios, since there is only one serial port.
You can purchase the USB CI-V interface through PayPal You can also mail your order with payment by check or money order, print and fill out the mail order form.
Download Area:
USB Drivers (note the FTDI driver is built into Linux kernel 2.4.20 or greater):
The latest USB drivers may always be obtained directly from the
FTDI Website
Windows XP/Vista/Windows 7/8/10 - Setup Executable to install drivers
Windows XP/Vista/Windows 7/8/10 - Zip file that extracts to folders with the driver files
Windows XP/Vista/Windows 7 - Setup Executable to install drivers
Windows XP/Vista/Windows 7 - Zip file that extracts to folders with the driver files
Windows 98/ME FTDI USB Driver
Mac OS X FTDI USB Driver Version 2.2.18 Latest for Mac OS X 10.9 / 10.10 / 10.11 / 10.12 / 10.13 (Recent macOS versions often have the FTDI driver already built in, and nothing needs to be installed)
Mac OS X FTDI USB Driver Version 2.2.18 Latest for Mac OS X 10.8
Mac OS X FTDI USB Driver Version 2.2.16 - Latest for Mac OS Lion 10.7
Mac OS X FTDI USB Driver Version 2.1.9 For PPC Macs
Intel Mac OS X FTDI USB Driver - Version 2.2.9 for 10.4 (Tiger) to 10.6 (Snow Leopard) Intel Macs
Mac OS 8/9 FTDI USB Driver
Radio Control Programs
We offer a simple program called BCSIcom which can let you test out your USB CI-V link.
It polls the radio to display the frequency and mode, and lets you set them as well.
It is not a full featured radio control program, but it is handy to check out that the
basic hardware, USB CI-V Interface, and drivers all work.
BCSIcom BCSIcom for Windows. (zip format)
BCSIcom-macOS BCSIcom for macOS 10.10-10.15, 64 bit app (zip format)
BCSIcomOSX BCSIcom for Mac OS X. Universal Binary for Intel and PowerPC Macs (zip format)
BCSIcomOSX BCSIcom for Mac OS X. Universal Binary for Intel and PowerPC Macs (dmg format)
BCSIcomMac BCSIcom for MacOS 9. (sit format)
Dog Park Software has several excellent
logging,
memory management, and
satellite tracking programs,
all for the Macintosh.
Look what our customers have to say:
Thank you for the prompt service!
Your USB->CI-V is working great with MacLoggerDX running with my IC-718!
Maurice, AB8XA
I have tried your USB CIV with N1MM, Ham Radio Deluxe, MMTTY, Hamscope and it works perfectly and very fast with all of them. I wish everything worked as well as this thing does. Thanks again!
Dave, N1NQX
The interface worked fine with the ic7000 and write log...Pretty much plug and play.
Chuck, KG9N
I received the USB CIV in the mail this afternoon, had no problems installing it (it took maybe 15 minutes total :-)), and I'm now enjoying learning to use "Ham Radio Deluxe" to control my ICOM 756.
Fred
Thanks for a great product, you saved me about $80 with your product for my ICOM-706MKIIG, very easy hookup, about 2 min.
Louis Taylor - KD6SBR "Tom"
Just wanted to thank you for the prompt delivery of the interface. Very nice and working great.
Rick - VE3PNK
I received the unit today and the setup went really well. Installed the OSX drivers. It worked with BCSIcom test program. I then configured VirtualPC 7.02 to use the usbserial-FTPQNU20 as COM1. Everything I tried so far has worked within Virtual PC - Ham Radio Deluxe and N3FJP's Amateur Contact Log. USB support within Virtual PC 7.02 is rocky at best so I was glad that the unit works as COM1. Thanks for selling these!
David KB5DRJ
Hi Chris, Just wanted to let you know, I received the "USB CI-V " for my old IC-718...I had no problems getting it up & working with "Hamlib"- Rig Control- on the Fldigi program...Very pleased !!... Thank you, John Boyer/W3JCB
Just a quick note to confirm safe receipt of the USB Icom CI-V Interface, well packaged and in good time ,to my address here in England.
I can confirm that once the software was downloaded to my Macbook air, this interface worked like a charm, first time and every time, allowing me to run Maclogger DX, and interfacing seamlessly with my Icom 7600.
Please feel free to use this as an endorsement for excellent customer service and a first-class product.
Good to see high standards of customer care - which is rare nowadays and worth celebrating! David, M0ODM
|